LED RGBW strip Chameleon 24V KIT with led strip, transformer, profiles and remote control

I lager
SKU
RGBstripSET+remote

Set includes 5m of RGB led strip, remote control and receiver box, transformer 120W for the strip and 5m of surface mounted aluminium profile. Easy, complete set ready for installation!

Från 3 702,97 kr

Till 3 921,24 kr

LED RGBW strip Chameleon 24V KIT with led strip, transformer, profiles and remote control is available to buy in increments of 1
Anpassa LED RGBW strip Chameleon 24V KIT with led strip, transformer, profiles and remote control
1 x LED RGBW STRIP SMD 5050, 14,4W/m (72W/5m) 24V, water resistant IP65   + 0,00 kr
I lager 2
2 x Surface LED strip aluminium PROFILE 16x18x2500mm, matte white   + 0,00 kr
I lager 352
1 x VaLO 24V DRIVER 100W with build-in RF receiver   + 0,00 kr
I lager 92
1 x VaLO — LED remote dimmer for 6 groups of RGBW lights, wireless control   + 0,00 kr
I lager 1

* Obligatoriska fält

LED RGBW strip Chameleon 24V KIT with led strip, transformer, profiles and remote control is available to buy in increments of 1
Din anpassning
LED RGBW strip Chameleon 24V KIT with led strip, transformer, profiles and remote control
LED RGBW strip Chameleon 24V KIT with led strip, transformer, profiles and remote control

I lager

3 702,97 kr

Översikt

    Set includes

    Set includes 5m of RGB led strip, remote control and receiver box, transformer 120W for the strip and 5m of surface mounted aluminium profile. Easy, complete set ready for installation!

    High quality 12V RGB led strip!

    This led strip uses RGB circuit with the CRI around 83 with (white colour). The led strip is dimmable and waterproof with a surface that does not turn yellow. As a tape, it uses 3M tape that is extra durable and attatches the strip firmly. Led strip 14,4W/m is equivalent to 120cm fluorescent tube, so you'll even save energy!

    Lighting

    The strip is controlled by a touch screen remote, where you can select one of the 28 programmes available. To product can be seen at our warehouse store. Our favorite program is 7 colour fade, where the light changes calmly from one colour to another.

    This strip is mostly used in indirect lighting and for creating different moods. Perfect for spas, bars and terraces, also we have noticed that kids love this. RGB led strip has 14,4W/m and has 60 led circuits on a meter. This makes the light even, if installed in a way you cannot see the light source ie. indirect light. When installed on a profile, there are visible dots to be seen if looked straight to the light (not visible when installed next to a wall). And as the CRI is over 83, which is suitable to be used in homes.

    Installation

    LED strip comes in a 5m roll that can be cut to measure in every 5cm. We recommend that you solder the wanted lengths together as we have noticed that the fast clips tend to loosen after few years and then the light starts flickering. There are plugs soldered to both ends of the strip taht you can use, but it depends a lot of your desired use if you should use the or not. We will help you to figure out that. NOTE! When soldering, remember to heat the copper spots on the dtrip to make the tin stick.

    All installations should be made on top of aluminium (included on the set), that way the excess heat gets conducted away from led circuit and makes it last longer.

    LED strip works well with solar power and in boats and cars, as it is 12VDC you might not even need a driver!

    Dimming

    The strip is controlled by a touch screen remote, where you can select one of the 28 programmes available. To product can be seen at our warehouse store. Our favourite programme is 7 colour fade, where the light changes calmly from one colour to another. You can connect four 5m strips to one controller box (output power: 12V<288W), but you just need to take care that the driver you use gives enough power for the strip (max. 5m from driver to the last led, so connection from the centre recommended).

    This is a perfect solution also in places where you have power for the strip but no wall switch ready. With this system, you just hook the wireless receiver between led strip and driver and have the wireless button were ever you like.

    Create a light of your own

    Why would you use led strip only in traditional way (cabinets, indirect light etc.) when you can make a light of almost anything. Old cart wheel, zink bucket or even a wooden boat turns in to a light when you put led strip inside it! Get creative!

    Light colour temperature

    RGB (red, green and blue) and neutral white colour (4000K).

    Mer information
    Color temperature (K) 4000
    Voltage (V) 24
    Guarantee (year) 3 years
    Colour rendering (CRI ±3) 85
    Model RGB STRIP144
    Lumen 54 567,72
    Watt 785,78
    Lifespan 35000
    Dimensions 10x5x5000mm (roll)
    Approved CE, RoHS, IP65
    Energy class A++
    Muuta 3M tape on backside
    IP Class IP55
    Light Adjustment RGBW
    Kundrecensioner
    Customer Questions
    No Questions
    Did you find what you were looking for?

    Strip sould ALWAYS be installed on aluminium profile for the led strip to cool down properly. Incorrect installation will void warranty.

    Ratings & Reviews

    Bli först med att recensera denna produkt

    © Lamppukauppa Led Store Oy. 2022 All Rights Reserved