Bli först med att recensera denna produkt
LED-ljusremsa med RÖRELSEBRYTARE, 12V-24V
Ej i lager
SKU
solder-motion
Motion switch for led strip. Perfect solution for under the cabinet lights in kitchens or other systems with no wall switch (night lights at bedroom, wardrobe lights etc.). Is suitable to be used with strips with voltage: 12-24V. On / off closer than 10 cm sweep.
LED-ljusremsa med RÖRELSEBRYTARE, 12V-24V is available to buy in increments of 1
Close proximity motion switch for led stripes. Perfect solution for under the cabinet lights in kitchens or other systems with no wall switch (night lights at bedroom, wardrobe lights etc.). Functions when the motion occurs closer than 10 cm from the switch.
Is suitable to be used with strips with voltage: 12-24V.
With 12V led strips, maximum 96W load and with 24V led strips maximum 192W load (8A).
Installation
Solder between the strip and the driver (12-24V input and 12-24V output).
1. Make sure you use constant voltage driver instead of constant current driver. Have the power off when soldering.
2. Make sure the positive "+" and the negative "-" are correctly connected to led power supply (led driver). Positive and negative cannot be reversed!
If you install motion switch on a led strip inside the profile, you can remove cords from the side of the led strip, so that the soldering connects the switch and the strip next to each other! See video.
Size
Measurements: 10x47mm
| Guarantee (year) | 3 years |
|---|---|
| Model | HEILAUTUSkytkin |
| Watt | 1 066,82 |
| Dimensions | 10x47mm |
| Product height | 4.7 |
| Product width | 1 |
| Approved | CE, RoHS |
| Energy class | A++ |
| Muuta | Solder the switch block between strip and driver. |
| IP Class | IP21 |
Kundrecensioner
Customer Questions
Ej tillgängligt